Teletronics Enterprise SIP Server Manual do Utilizador descarregar pdf (Página 32)

TELETRONICS INTERNA

TIONAL, INC.

31 Enterprise SIP Server Tutorial – Dial Plan

s-tut-dp1.51-041228

8.2. Setting up the Network Interface

The Enterprise SIP Server can automatically acquire the Network Interface found by the OS,

setup by the user isn’t necessary. If the Enterprise SIP Server is executed on a Unix-type OS,

the network information will be taken from the /etc/hosts file.

If routing requires port forwarding or you don’t want to use the interfaces found by the OS,

setup using the items shown must be set.The NAT traversal functionality will select the most

optimal interface from the list of interfaces that are set. If a network interface is set in the Dial

Plan, it will have priority.

The interface for any call should be set within the “Network settings” menu in the Enterprise

SIP Server administration tool window.

Parameter

Setup Value

Interface address 1_3

Interface to use

¸ For individual connections, you need to assign the network interface in the Dial Plan

individually.

8.2.1. If the callee’s domain is “gw”, the interface 192.168.1.100 will be used for

sending packets to the callee

Matching Patterns

Deploy Patterns

$request=^INVITE

to=@gw[ >;]*

$ifdst=192.168.1.100

8.2.2. If the caller’s IP Address is 192.168.0.5, the receiving interface will use the

settings of “Interface address 2”

Matching Patterns

Deploy Patterns

$request=^INVITE

$addr=192\.168\.0\.5$

$ifdst=&2

8.2.3. If the callee’s User Name prefix is 10, the network interface will use

192.168.3.2 is used for sending packets to the caller

Matching Patterns

Deploy Patterns

$request=^INVITE

to=sip:10\.

$ifsrc=192.168.3.2

8.3. RTP Stream Tunneling

By using RTP stream (RTP and RTCP packets) tunneling (goes through a SIP server), you can

talk through different networks. When NAT Traversal is set active, RTP stream tunneling will

occur automatically. Also each RTP stream tunneling can be switched with every connection.

The setting for any call is set in the “RTP exchanger” inside the “Configuration” menu in the

“Enterprise SIP Server Administration Tool” menu.

Parameter

Setup Value

RTP relay

ON/OFF (RTP Stream Tunnel is active

or inactive)

¸ For individual connections, you need to set the RTP stream tunneling in the Dial Plan

individually.

8.3.1. If the caller’s IP Address is 192.168.0.5, the RTP Stream Tunneling will be

established

Matching Patterns

Deploy Patterns

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38

Comentários a estes Manuais

Sem comentários

Teletronics Enterprise SIP Server Manual do Utilizador Página 32

Comentários a estes Manuais

Manuais e produtos relacionados com Comunicação Teletronics Enterprise SIP Server