Teletronics IP-PBX Server Manual do Utilizador

EZLoop® IP-PBX Enterprise SIP ServerCopyright 2007 Teletronics International, Inc.2 Choke Cherry Road, Rockville, MD [email protected]

102.5.2 Extension ConfigurationUser has to set Extension account for other device to register on EZLoop® IP-PBXEnterprise SIP Server.Enter Configurati

11After press Modify can input detail setting for Extension. Extension Number: Assign the number of Extension. This number is also the registername

12setting should be also match the Keypad setting of Extension device. NAT Traversal: If the Trunk device is behind a device performing NAT,

13

14After press Modify can input detail setting for Trunk. Trunk Number: Assign the number of Trunk. This number is also the register namefor Trunk de

15 DTMF: User can select DTMF type to be RFC2833, In-band, or SIP-Info. NAT Traversal: If the Trunk device is behind a device performing N

16Transfer) key if the call is Between Extension and Trunk. Default is disabled.Note: If you enable this feature in Trunk page, we suggest you also

17CH3. Full Web ConfigurationsAfter Login EZLoop® IP-PBX Enterprise SIP Server will see screen as below, andthere are four main categories, user ca

183.1 ConfigurationUser can set EZLoop® IP-PBX Enterprise SIP Server telephony configuration underConfiguration category.3.1.1 IP PBXEnter Configurati

19SIP Setting IP-PBX Realm: Configure Realm of EZLoop® IP-PBX Enterprise SIP Server. Thisparameter is essential when there is more than one EZLoop

2CH1. Overview...41.1 Specifications ...

20CDR program is proprietary. For more information about such CDR program,please contact with your contact window of .Note: If you already

21Note:• If the time is a non-working time, the greeting files will be greeting-night.gsm. Youcan change it by dialing to **113.• For more informa

22

23After press Modify can input detail setting for Extension. Extension Number: Assign the number of Extension. This number is also the registername

24 Keypad: User can select Keypad type to be RFC2833, In-band, or SIP-Info. Thesetting should be also match the Keypad setting of Extension

25After press Modify can input detail setting for Trunk.Example 1: Set Trunk for FXO gatewayExample 2: Set Trunk ID for SIP Trunk

26 Trunk Number: Assign the number of Trunk. This number is also the register namefor Trunk device.Note:• The Trunk Number can also be a “Trunk ID”

27and R4.Note:• For more information about Route Level, please refer to the user manual: 3.1.5.1Outgoing Call Rule. Keypad: User can select DTMF ty

28between CPE device and EZLoop® IP-PBX Enterprise SIP Server. Hot-Key Tran: Enable this feature will permits the calling party or called p

29Example 1: Disable SIP TrunkExample 2: Enable SIP Trunk Enable: Check to enable this SIP Trunk. Line Number: Line Number for registering to ITSP

34.3.9 Call Routing ...584.3.10 Call Waiting (Clie

30 Realm: Realm of ITSP or another EZLoop® IP-PBX Enterprise SIP Server.Note:• When a call was sent form EZLoop® IP-PBX Enterprise SIP Server to a

313.1.5.1 Outgoing Call RuleOutgoing Call Rule means from subscriber (Extension or Trunk registered onEZLoop® IP-PBX Enterprise SIP Server) to call ou

32• If you set the Digits Length as a specific value, such as 10, the dialednumber digits length should full match to 10, or you can se

33Press Apply to save configuration, or press Cancel to quit configuration.3.1.5.2 Incoming Call RuleIncoming Call Rule means call from other non-subs

34Drop. If the called number is 070070101, the EZLoop® IP-PBX Enterprise SIP Serverwill add **999 then send **999070070101 as the called number. Dro

35 Group Number: Input a specific Group Number here.Note:• The Group number should NOT be the same with Extension, Trunk Number, andSpeed Dial Numb

36

37 SpeedDial Number: You can input a specified SpeedDial Number here.Note:• The SpeedDial Number should not be the same with Extension, Trunk Numbe

383.1.8.1 Web Setting Http Port: You can change the Http port for EZLoop® IP-PBX Enterprise SIP Server.Default is 10087.Note:• After Changing the H

393.2 InformationUser can check some information of EZLoop® IP-PBX Enterprise SIP Server here.3.2.1 SubscriberEnter Information  Subscriber to check

4CH1. OverviewThe EZLoop® IP-PBX Enterprise SIP Server is the next generation all-in-one IP PBXsystem for small to medium enterprise. It is also desi

403.3 ManagementUser can execute EZLoop® IP-PBX Enterprise SIP Server system configuration andmanagement under this category.3.3.1 NetworkEn

41• DNS: Input DNS address.• PPPoE ID: If you choose the Mode to PPPoE, you should also input the PPPoEID here for authentication.• PPPoE PWD: If

423.3.3 SMTP SettingEZLoop® IP-PBX Enterprise SIP Server can support Voice Mail to e-mail. Beforeactivate this feature, you should give the

433.3.5 Firmware UploadEnter Management  Firmware Upload  Choose the Firmware options(Application, Kernel and File System)  Press Browse a

443.3.6 Music UploadUser can customize Ring Back Tone (Transferring Tone) by upload new wave file onEZLoop® IP-PBX Enterprise SIP Server. Please recor

45by your pc and switch the format and file name to greeting-day.gsm. And youshould choose the correct group and file name to instead the old one.• F

463.3.9 Flash CleanEnter Management  Flash Clean Press Apply will clean all configurations ofEZLoop® IP-PBX Enterprise SIP Server and reset to facto

473.4 Reboot SystemPress Apply to reboot system. Please wait for a few minutes and reload web pageagain.

48CH4. Application Setting4.1 Customize Automated Attendant4.1.1 Record GreetingUse any Extension phone set to dial in **111 will hear beep, then user

49**0010***001010.gsmten**0011***001111.gsmeleven (It is reserved, not functional now)**0012***001212.gsmtwelve (It is reserved, not functional now)**

5 Codecs G.711 (A-Law & _-Law) G.729 Technical Features Subscriber NAT transversal Phone set record Greeting Management: Web Browser

50**0135***0135thousands.gsmthousand (It is reserved, not functional now)**0136***0136million.gsmmillion (It is reserved, not functional now)**0137***

51**119***119unavailable.gsmI am sorry, the extension number you dialed isunavailable, please dial another extensionnumber or press 9 for operator.**1

52the directory. (It is reserved, not functionalnow)**0319***0319vm-forwardoptions.gsmPress 1 to pre-pend the message, or 2 toforward a message withou

53sender does not have a mailbox (It is reserved,not functional now)**0349***0349vm-nomore.gsmNo more messages (It is reserved, notfunctional now)**03

54**0376***0376vm-starmain.gsmPress star to return the main menu (It isreserved, not functional now)**0377***0377vm-tempgreeting2.gsmPress 1 to record

55**0407***0407pax-transfer.gsmTransfer.**0408***0408privacy-incorrect.gsmI’m sorry, that number is not valid. (It isreserved, not functional now)**04

564.2 Customize Ring Back Tone (Transferring Tone)User can customize Ring Back Tone by upload new wave file on EZLoop® IP-PBXEnterprise SIP Server. Pl

574.3 Call Features4.3.1 AuthenticationWhen EZLoop® IP-PBX Enterprise SIP Server gets a Registration or Invite (incomingcall) from a remote location,

584.3.10 Call Waiting (Client based)The EZLoop® IP-PBX Enterprise SIP Server does not support “server Call Waiting”now, this feature should be done by

59Application between CPE device and EZLoop® IP-PBX Enterprise SIP Server.4.3.21 Voice Mail to e-mail EZLoop® IP-PBX Enterprise SIP Server does

61.2 Hardware Overview1.2.1 Front Panel and LED Indication Power: Light on when EZLoop® IP-PBX Enterprise SIP Server is powered on. Status: Light

60CH5. Appendix-Application between CPE device and EZLoop®IP-PBX Enterprise SIP Server.Traveler: 110InternetITSPEXT: 101EXT: 102EXT: 103EXT: 104EXT:

615.1 Extensions register to EZLoop® IP-PBX Enterprise SIP Server withnumber 101 to 106. All Extensions can talk to each other.• Set EZLoop® IP-PBX E

62• Step2: Configure ExtensionsInternetITSPEXT: 101EXT: 102EXT: 103EXT: 104EXT: 105EXT: 106PSTN

63• In EZLoop® IP-PBX Enterprise SIP Server, prepare Extension accounts for Client device. (Thereare 10 default Extensions, from 101 to 110, so we us

64Primary Proxy IP Address and Line Number…, etc. After configure SIP information, please pressOK  Commit Data .• If all of the above settings are

655.2 The call will be forward to MailBox if the extension 101 is busy or noanswer.Step1: Configure SMTP setting• Go to Management SMTP Setting to c

66Enterprise SIP Server will send voice mail to your mail box with a WAV format. Below is anexample.

675.3 The Trunk (EZLoop® PSTN Gateway FX04/06) can also register toEZLoop® IP-PBX Enterprise SIP Server (registered number 888).Step1: Setup Net

68• In EZLoop® IP-PBX Enterprise SIP Server, prepare Trunk accounts for EZLoop® PSTN GatewayFX04/06. (There are 2 default Trunks, 888 and 889

69Set Account and Password for EZLoop® PSTN Gateway FX04/06• If all of the above settings are correct, you can go to Information  Subscriber page to

71.2.2 Back Panel Reset: Network and Login information will return to default values. LAN/WAN: RJ-45 socket, complied with Ethernet 10/100base-T.T

70Configuration of FXOusr/config$ ifaddr –ip 192.168.13.68 –mask 255.255.248.0 –gate 192.168.13.254(set IP address for EZLoop® PSTN Gateway FX04/06)us

715.4 EZLoop® IP-PBX Enterprise SIP Server can register to ITSP as a SIP-Trunk.EZLoop® IP-PBX Enterprise SIP Server can register to another I

72Step3: Confirm the register status of SIP Trunk• Please confirm the register status. If the Status shows Registered, which means SIP Trunkregistrat

735.5 All of the Extensions can call out to local PSTN via EZLoop® PSTNGateway FX04/06.Now the FXO is registering to EZLoop® IP-PBX Enterprise SIP Se

745.6 All of the Extensions can call out to Mobile Phone via ITSP.Now we set EZLoop® IP-PBX Enterprise SIP Server to register an account 070070 to an

75Step1: Confirm the EZLoop® IP-PBX Enterprise SIP Server register to ITSP successfully• Please Go to SIP Trunk Page to confirm the register

76In Trunk page, you should find there a new record 070070.Step3: Set Prefix route in Routing Table page• Please Go to Routing Table Page to set Pr

77Confirm the Outgoing Call Rule. Now the Extensions can dial to 0922123123 to reach mobile phone viaITSP. If extension called out with prefix number

785.7 User in PSTN side should be able to contact with Extensions viaEZLoop® PSTN Gateway FX04/06 We hope the EZLoop® IP-PBX Enterprise

795.8 User in ITSP side should be able to contact with Extensions 070111222 is a subscriber of ITSP , we hope 0701 11222 can also contact with exte

8CH2. Start to configure EZLoop® IP-PBX Enterprise SIP Server2.1 Step 1Connect LAN port of EZLoop® IP-PBX Enterprise SIP Server with PC via crossoverc

80We set the incoming call rule with Prefix 070070 and Digits Length 6. When EZLoop® IP-PBXEnterprise SIP Server got a called number wi

815.9 User in ITSP side can call out to local PSTN via EZLoop® PSTNGateway FX04/06. Now, 070111222 can reach auto attendant. W e hope

82User can reach the auto attendant (**999) now, because we already set incoming call rule in RoutingTable page. Now, they can redial to 22198888 be

835.10 Traveler can call back to EXT, and Traveler can also call to localPSTN and Mobile phone number.Step1: Create account for the Traveler• The

84• If all of the above settings are correct, you can go to Information  Subscriber page to confirmthe register status.Now, the Traveler can contact

92.5 Step 5: To configure basic and essential configurationsTo make EZLoop® IP-PBX Enterprise SIP Server work have to set some basic andessential conf